Problems executing jupyter notebook script from cmd in windows
First I added the 2 directory paths where I installed Anaconda3 in the Path system variable because I was getting this error:
'jupyter' is not recognized as an internal or external command.
i.e. 1. C:ProgramDataAnaconda3
- C:ProgramDataAnaconda3Scripts
However, I still cannot execute the script. I get a bunch of Tracebacks and the error at the end:
ImportError: DLL load failed: The specified module could not be found.
I am not sure where my script file needs to be but I tried 2 directories. First the initial directory where jupyter creates it and next I moved it inside the Anaconda3Scripts folder but both to no avail. I am also getting the same error if I try to run jupyter from cmd.
python cmd jupyter-notebook
edited Nov 13 '18 at 5:55
Aqueous Carlos
373415
asked Nov 13 '18 at 5:24
BendemannBendemann
577
add a comment |
First I added the 2 directory paths where I installed Anaconda3 in the Path system variable because I was getting this error:
'jupyter' is not recognized as an internal or external command.
i.e. 1. C:ProgramDataAnaconda3
- C:ProgramDataAnaconda3Scripts
However, I still cannot execute the script. I get a bunch of Tracebacks and the error at the end:
ImportError: DLL load failed: The specified module could not be found.
I am not sure where my script file needs to be but I tried 2 directories. First the initial directory where jupyter creates it and next I moved it inside the Anaconda3Scripts folder but both to no avail. I am also getting the same error if I try to run jupyter from cmd.
python cmd jupyter-notebook
edited Nov 13 '18 at 5:55
Aqueous Carlos
373415
asked Nov 13 '18 at 5:24
BendemannBendemann
577
did you try running it from anaconda prompt?
– gavin
Nov 13 '18 at 6:23
That is just opening the jupyter file in the browser. I would like to execute it like you would normally do with a python file: python test.py arg1 arg2
– Bendemann
Nov 13 '18 at 6:51
add a comment |
First I added the 2 directory paths where I installed Anaconda3 in the Path system variable because I was getting this error:
'jupyter' is not recognized as an internal or external command.
i.e. 1. C:ProgramDataAnaconda3
- C:ProgramDataAnaconda3Scripts
However, I still cannot execute the script. I get a bunch of Tracebacks and the error at the end:
ImportError: DLL load failed: The specified module could not be found.
I am not sure where my script file needs to be but I tried 2 directories. First the initial directory where jupyter creates it and next I moved it inside the Anaconda3Scripts folder but both to no avail. I am also getting the same error if I try to run jupyter from cmd.
python cmd jupyter-notebook
edited Nov 13 '18 at 5:55
Aqueous Carlos
373415
asked Nov 13 '18 at 5:24
BendemannBendemann
577
First I added the 2 directory paths where I installed Anaconda3 in the Path system variable because I was getting this error:
'jupyter' is not recognized as an internal or external command.
i.e. 1. C:ProgramDataAnaconda3
- C:ProgramDataAnaconda3Scripts
However, I still cannot execute the script. I get a bunch of Tracebacks and the error at the end:
ImportError: DLL load failed: The specified module could not be found.
I am not sure where my script file needs to be but I tried 2 directories. First the initial directory where jupyter creates it and next I moved it inside the Anaconda3Scripts folder but both to no avail. I am also getting the same error if I try to run jupyter from cmd.
python cmd jupyter-notebook
python cmd jupyter-notebook
edited Nov 13 '18 at 5:55
Aqueous Carlos
373415
asked Nov 13 '18 at 5:24
BendemannBendemann
577
edited Nov 13 '18 at 5:55
Aqueous Carlos
373415
asked Nov 13 '18 at 5:24
BendemannBendemann
577
edited Nov 13 '18 at 5:55
Aqueous Carlos
373415
edited Nov 13 '18 at 5:55
Aqueous Carlos
373415
edited Nov 13 '18 at 5:55
Aqueous Carlos
373415
373415
asked Nov 13 '18 at 5:24
BendemannBendemann
577
asked Nov 13 '18 at 5:24
BendemannBendemann
577
asked Nov 13 '18 at 5:24
BendemannBendemann
577
577
did you try running it from anaconda prompt?
– gavin
Nov 13 '18 at 6:23
That is just opening the jupyter file in the browser. I would like to execute it like you would normally do with a python file: python test.py arg1 arg2
– Bendemann
Nov 13 '18 at 6:51
add a comment |
did you try running it from anaconda prompt?
– gavin
Nov 13 '18 at 6:23
That is just opening the jupyter file in the browser. I would like to execute it like you would normally do with a python file: python test.py arg1 arg2
– Bendemann
Nov 13 '18 at 6:51
did you try running it from anaconda prompt?
– gavin
Nov 13 '18 at 6:23
did you try running it from anaconda prompt?
– gavin
Nov 13 '18 at 6:23
That is just opening the jupyter file in the browser. I would like to execute it like you would normally do with a python file: python test.py arg1 arg2
– Bendemann
Nov 13 '18 at 6:51
That is just opening the jupyter file in the browser. I would like to execute it like you would normally do with a python file: python test.py arg1 arg2
– Bendemann
Nov 13 '18 at 6:51
add a comment |
1 Answer
1
active
oldest
votes
IPython notebooks are stored in .ipynb formats. While python files are of .py format. This being said, you'll have to convert the notebook to a python file.
cd into the directory your notebook exists and type the following in your command prompt
$ jupyter nbconvert --to script [NOTEBOOK_NAME].ipynb
A .py file with the same name should now be there in the same directory.
You can find other export options available, and the examples mentioned in their docs
answered Nov 13 '18 at 7:12
gavingavin
1091212
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
StackExchange.using("externalEditor", function ()
StackExchange.using("snippets", function ()
StackExchange.snippets.init();
);
);
, "code-snippets");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "1"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53274330%2fproblems-executing-jupyter-notebook-script-from-cmd-in-windows%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
IPython notebooks are stored in .ipynb formats. While python files are of .py format. This being said, you'll have to convert the notebook to a python file.
cd into the directory your notebook exists and type the following in your command prompt
$ jupyter nbconvert --to script [NOTEBOOK_NAME].ipynb
A .py file with the same name should now be there in the same directory.
You can find other export options available, and the examples mentioned in their docs
answered Nov 13 '18 at 7:12
gavingavin
1091212
add a comment |
IPython notebooks are stored in .ipynb formats. While python files are of .py format. This being said, you'll have to convert the notebook to a python file.
cd into the directory your notebook exists and type the following in your command prompt
$ jupyter nbconvert --to script [NOTEBOOK_NAME].ipynb
A .py file with the same name should now be there in the same directory.
You can find other export options available, and the examples mentioned in their docs
answered Nov 13 '18 at 7:12
gavingavin
1091212
add a comment |
IPython notebooks are stored in .ipynb formats. While python files are of .py format. This being said, you'll have to convert the notebook to a python file.
cd into the directory your notebook exists and type the following in your command prompt
$ jupyter nbconvert --to script [NOTEBOOK_NAME].ipynb
A .py file with the same name should now be there in the same directory.
You can find other export options available, and the examples mentioned in their docs
answered Nov 13 '18 at 7:12
gavingavin
1091212
IPython notebooks are stored in .ipynb formats. While python files are of .py format. This being said, you'll have to convert the notebook to a python file.
cd into the directory your notebook exists and type the following in your command prompt
$ jupyter nbconvert --to script [NOTEBOOK_NAME].ipynb
A .py file with the same name should now be there in the same directory.
You can find other export options available, and the examples mentioned in their docs
answered Nov 13 '18 at 7:12
gavingavin
1091212
answered Nov 13 '18 at 7:12
gavingavin
1091212
answered Nov 13 '18 at 7:12
gavingavin
1091212
answered Nov 13 '18 at 7:12
gavingavin
1091212
1091212
add a comment |
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53274330%2fproblems-executing-jupyter-notebook-script-from-cmd-in-windows%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
did you try running it from anaconda prompt?
– gavin
Nov 13 '18 at 6:23
That is just opening the jupyter file in the browser. I would like to execute it like you would normally do with a python file: python test.py arg1 arg2
– Bendemann
Nov 13 '18 at 6:51