Hydrogen production

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP




Hydrogen production is the family of industrial methods for generating hydrogen. Currently the dominant technology for direct production is steam reforming from hydrocarbons. Many other methods are known including electrolysis and thermolysis.


In 2006, the United States was estimated to have a production capacity of 11 million tons of hydrogen. 5 million tons of hydrogen were consumed on-site in oil refining, and in the production of ammonia (Haber process) and methanol (reduction of carbon monoxide). 0.4 million tons were an incidental by-product of the chlor-alkali process.[1] Hydrogen production is an estimated $100 billion industry.[2] According to the U.S. Department of Energy, 53 million metric tons were consumed worldwide in 2004. There are no natural hydrogen deposits, and for this reason the production of hydrogen plays a key role in modern society.[3]


As of 1999, the majority of hydrogen (∼95%) is produced from fossil fuels by steam reforming or partial oxidation of methane and coal gasification with only a small quantity by other routes such as biomass gasification or electrolysis of water.[4] Around 8GW of electrolysis capacity is installed
worldwide, accounting for around 4% of global hydrogen production (Decourt et al., 2014). Developing affordable methods for producing hydrogen with less damage to the environment is a goal of the hydrogen economy.




Contents





  • 1 Steam reforming

    • 1.1 CO2 sequestration



  • 2 Other production methods from fossil fuels

    • 2.1 Partial oxidation


    • 2.2 Plasma reforming


    • 2.3 Coal


    • 2.4 Petroleum coke



  • 3 From water

    • 3.1 Gas Extraction

      • 3.1.1 Industrial output and efficiency



    • 3.2 Chemically assisted electrolysis (Organic solution assisted water electrolysis)


    • 3.3 Radiolysis


    • 3.4 Thermolysis


    • 3.5 Thermochemical cycle


    • 3.6 Ferrosilicon method


    • 3.7 Photobiological water splitting


    • 3.8 Photocatalytic water splitting


    • 3.9 Biohydrogen routes

      • 3.9.1 Fermentative hydrogen production


      • 3.9.2 Enzymatic hydrogen generation


      • 3.9.3 Biocatalysed electrolysis



    • 3.10 Xylose



  • 4 Carbon-neutral hydrogen


  • 5 Use of hydrogen


  • 6 See also


  • 7 References


  • 8 External links




Steam reforming


Main article: Steam reforming

There are four main sources for the commercial production of hydrogen: natural gas, oil, coal, and electrolysis; which account for 48%, 30%, 18% and 4% of the world’s hydrogen production respectively.[5]
Fossil fuels are the dominant source of industrial hydrogen.[6] Carbon dioxide can be separated from natural gas with a 60-70% efficiency for hydrogen production and from other hydrocarbons to varying degrees of efficiency.[7]Specifically, bulk hydrogen is usually produced by the steam reforming of methane or natural gas.[8]
The production of hydrogen from natural gas is the cheapest source of hydrogen currently. This process consists of heating the gas to between 700-1100°C in the presence of steam and a nickel catalyst. The resulting endothermic reaction breaks up the methane molecules and forms carbon monoxide CO and hydrogen H2. The carbon monoxide gas can then be passed with steam over iron oxide or other oxides and undergo a water gas shift reaction to obtain further quantities of H2. The downside to this process is that its major byproducts are CO, CO2 and other greenhouse gases.[5] Depending on the quality of the feedstock (natural gas, rich gases, naphtha, etc.), one ton of hydrogen produced will also produce 9 to 12 tons of CO2.[9]


For this process high temperature (700–1100 °C) steam (H2O) reacts with methane (CH4) in an endothermic reaction to yield syngas.[10]




Gasification


CH4 + H2O → CO + 3 H2

In a second stage, additional hydrogen is generated through the lower-temperature, exothermic, water gas shift reaction, performed at about 360 °C:


CO + H2O → CO2 + H2

Essentially, the oxygen (O) atom is stripped from the additional water (steam) to oxidize CO to CO2. This oxidation also provides energy to maintain the reaction. Additional heat required to drive the process is generally supplied by burning some portion of the methane.



CO2 sequestration


Steam reforming generates carbon dioxide (CO2). Since the production is concentrated in one facility, it is possible to separate the CO2 and dispose of it without atmospheric release, for example by injecting it in an oil or gas reservoir (see carbon capture), although this is not currently done in most cases. A carbon dioxide injection project has been started by the Norwegian company Statoil in the North Sea, at the Sleipner field.


Integrated steam reforming / co-generation - It is possible to combine steam reforming and co-generation of steam and power into a single plant. This can deliver benefits for an oil refinery because it is more efficient than separate hydrogen, steam and power plants. Air Products recently built an integrated steam reforming / co-generation plant in Port Arthur, Texas.[11]



Other production methods from fossil fuels



Partial oxidation


Hydrogen production from natural gas or other hydrocarbons is achieved by partial oxidation. A fuel-air or fuel-oxygen mixture is partially combusted resulting in a hydrogen rich syngas. Hydrogen and carbon monoxide are obtained via the water-gas shift reaction.[5] Carbon dioxide can be co-fed to lower the hydrogen to carbon monoxide ratio.


The partial oxidation reaction occurs when a substoichiometric fuel-air mixture or fuel-oxygen is partially combusted in a reformer or partial oxidation reactor. A distinction is made between thermal partial oxidation (TPOX) and catalytic partial oxidation (CPOX). The chemical reaction takes the general form:


CnHm + n/2 O2 → n CO + m/2 H2

Idealized examples for heating oil and coal, assuming compositions C12H24 and C24H12 respectively, are as follows:


C12H24 + 6 O2 → 12 CO + 12 H2

C24H12 + 12 O2 → 24 CO + 6 H2


Plasma reforming


The Kværner-process or Kvaerner carbon black & hydrogen process (CB&H)[12] is a plasma reforming method, developed in the 1980s by a Norwegian company of the same name, for the production of hydrogen and carbon black from liquid hydrocarbons (CnHm). Of the available energy of the feed, approximately 48% is contained in the hydrogen, 40% is contained in activated carbon and 10% in superheated steam.[13] CO2 is not produced in the process.


A variation of this process is presented in 2009 using plasma arc waste disposal technology for the production of hydrogen, heat and carbon from methane and natural gas in a plasma converter[14]



Coal


For the production of hydrogen from coal, coal gasification is used. The process of coal gasification uses steam and a carefully controlled concentration of gases to break molecular bonds in coal and form a gaseous mix of hydrogen and carbon monoxide.[15]
This source of hydrogen is advantageous since its main product is coal-derived gas which can be used for fuel. The gas obtained from coal gasification can later be used to produce electricity more efficiently and allow a better capture of greenhouse gases than the traditional burning of coal.


Another method for conversion is low temperature and high temperature coal carbonization.[16]



Petroleum coke


Similarly to coal, petroleum coke can also be converted in hydrogen rich syngas, via coal gasification. The syngas in this case consists mainly of hydrogen, carbon monoxide and H2S, depending on the sulfur content of the coke feed. Gasification is an attractive option for producing hydrogen from almost any carbon source, while providing attractive hydrogen utilization alternatives through process integration.[17]



From water


Main article: Water splitting

Many technologies have been explored but it should be noted that as of 2007 "Thermal, thermochemical, biochemical and photochemical processes have so far not found industrial applications."[6] High temperature electrolysis of alkaline solutions has been used for the industrial scale production of hydrogen (see Sable Chemicals) and there are now a number of small scale polymer electrolyte membrane (PEM) electrolysis units available commercially.[18][19][20]



Gas Extraction


Main article: Electrolysis of water

Electrolysis consists of using electricity to split water into hydrogen and oxygen. Electrolysis of water is 70-80% efficient (a 20-30% conversion loss)[21][22] which is a higher efficiency than steam reforming of natural gas which is 60-75% efficient.[23] The (electrical) efficiency of electrolysis is expected to reach 82-86%[24] before 2030, while also maintaining durability as progress in this area continues at a pace.[25] Water electrolysis can operate between 50-80°C, while steam methane reforming requires temperatures between 700-1100°C.[26] The difference between the two methods is the primary energy used; either electricity (for electrolysis) or natural gas (for steam methane reforming). Due to their use of water, a readily available resource, electrolysis and similar water-splitting methods have attracted the interest of the scientific community. With the objective of reducing the cost of hydrogen production, renewable sources of energy have been targeted to allow electrolysis.[15]
There are three main types of cells, solid oxide electrolysis cells (SOECs), polymer electrolyte membrane cells (PEM) and alkaline electrolysis cells (AECs).[27] SOECs operate at high temperatures, typically around 800 °C. At these high temperatures a significant amount of the energy required can be provided as thermal energy (heat), and as such is termed High temperature electrolysis. The heat energy can be provided from a number of different sources, including waste industrial heat, nuclear power stations or concentrated solar thermal plants. This has the potential to reduce the overall cost of the hydrogen produced by reducing the amount of electrical energy required for electrolysis.[4][28][29][30] PEM electrolysis cells typically operate below 100 °C and are becoming increasingly available commercially.[4] These cells have the advantage of being comparatively simple and can be designed to accept widely varying voltage inputs which makes them ideal for use with renewable sources of energy such as solar PV.[31] AECs optimally operate at high concentrations electrolyte (KOH or potassium carbonate) and at high temperatures, often near 200 °C.



Industrial output and efficiency


Efficiency of modern hydrogen generators is measured by energy consumed per standard volume of hydrogen (MJ/m3), assuming standard temperature and pressure of the H2. The lower the energy used by a generator, the higher would be its efficiency; a 100%-efficient electrolyser would consume 39.4 kilowatt-hours per kilogram (142 MJ/kg) of hydrogen,[32] 12,749 joules per litre (12.75 MJ/m3). Practical electrolysis (using a rotating electrolyser at 15 bar pressure) may consume 50 kilowatt-hours per kilogram (180 MJ/kg), and a further 15 kilowatt-hours (54 MJ) if the hydrogen is compressed for use in hydrogen cars.[33]


Electrolyser vendors provide efficiencies based on enthalpy. To assess the claimed efficiency of an electrolyser it is important to establish how it was defined by the vendor (i.e. what enthalpy value, what current density, etc.).


There are two main technologies available on the market, alkaline and proton exchange membrane (PEM) electrolysers.
Traditionally, alkaline electrolysers are cheaper in terms of investment (they generally use nickel catalysts), but less efficient; PEM electrolysers, conversely, are more expensive (they generally use expensive platinum-group metal catalysts) but are more efficient and can operate at higher current densities, and can therefore be possibly cheaper if the hydrogen production is large enough.


Conventional alkaline electrolysis has an efficiency of about 70%,[34] however thyssenkrupp have recently developed an advanced alkaline water electrolyser with an efficiency of 82%[35]. Accounting for the use of the higher heat value (because inefficiency via heat can be redirected back into the system to create the steam required by the catalyst), average working efficiencies for PEM electrolysis are around 80%, or 82% using the most modern alkaline electrolysers.[36] PEM efficiency is expected to increase to approximately 86%[37] before 2030. Theoretical efficiency for PEM electrolysers are predicted up to 94%.[38]




H2 production cost ($-gge untaxed) at varying natural gas prices


Considering the industrial production of hydrogen, and using current best processes for water electrolysis (PEM or alkaline electrolysis) which have an effective electrical efficiency of 70-82%,[39][40][41] producing 1 kg of hydrogen (which has a specific energy of 143 MJ/kg or about 40 kWh/kg) requires 50–55 kWh of electricity. At an electricity cost of $0.06/kWh, as set out in the Department of Energy hydrogen production
targets for 2015,[42] the hydrogen cost is $3/kg. With the range of natural gas prices from 2016 as shown in the graph (Hydrogen Production Tech Team Roadmap, November 2017) putting the cost of SMR hydrogen at between $1.20 and $1.50, the cost price of hydrogen via electrolysis is still over double 2015 DOE hydrogen target prices. The US DOE target price for hydrogen in 2020 is $2.30/kg, requiring an electricity cost of $0.037/kWh, which is achievable given recent PPA tenders[43] for wind and solar in many regions. This puts the $4/gge H2 dispensed objective well within reach, and close to a slightly elevated natural gas production cost for SMR.


In many cases, the advantage of electrolysis over SMR hydrogen is that the hydrogen can be produced on-site, meaning that the costly process of delivery via truck or pipeline is avoided.


In other parts of the world, steam methane reforming is between $1-3/kg on average. This makes production of hydrogen via electrolysis cost competitive in many regions already, as outlined by Nel Hydrogen[44] and others, including an article by the IEA[45] examining the conditions which could lead to a competitive advantage for electrolysis.



Chemically assisted electrolysis (Organic solution assisted water electrolysis)


In addition to reducing the voltage required for electrolysis via the increasing of the temperature of the electrolysis cell it is also possible to electrochemically consume the oxygen produced in an electrolyser by introducing a fuel (such as carbon/coal,[46]methanol,[47][48]ethanol,[49]formic acid,[50] glycerol,[50] etc.) into the oxygen side of the reactor. This reduces the required electrical energy and has the potential to reduce the cost of hydrogen to less than 40~60% with the remaining energy provided in this manner.[51] In addition, carbon/hydrocarbon assisted electrolysis has the potential to offer a less energy intensive, cleaner method of using chemical energy in various sources of carbon, such as low-rank and high sulfur coals, biomass, alcohols and methane (Natural Gas), where pure CO2 produced can be easily sequestered without the need for separation.[52]



Radiolysis


Nuclear radiation routinely breaks water bonds, in the Mponeng gold mine, South Africa, researchers found in a naturally high radiation zone a community dominated by a new phylotype of Desulfotomaculum, feeding on primarily radiolytically produced H2.[53]Spent nuclear fuel is also being looked at as a potential source of hydrogen.



Thermolysis


Water spontaneously dissociates at around 2500 °C, but this thermolysis occurs at temperatures too high for usual process piping and equipment. Catalysts are required to reduce the dissociation temperature.



Thermochemical cycle


Main article: thermochemical cycle

Thermochemical cycles combine solely heat sources (thermo) with chemical reactions to split water into its hydrogen and oxygen components.[54] The term cycle is used because aside from water, hydrogen and oxygen, the chemical compounds used in these processes are continuously recycled. If electricity is partially used as an input, the resulting thermochemical cycle is defined as a hybrid one.


The sulfur-iodine cycle (S-I cycle) is a thermochemical cycle processes which generates hydrogen from water with an efficiency of approximately 50%. The sulfur and iodine used in the process are recovered and reused, and not consumed by the process. The cycle can be performed with any source of very high temperatures, approximately 950 °C, such as by Concentrating solar power systems (CSP) and is regarded as being well suited to the production of hydrogen by high-temperature nuclear reactors,[55] and as such, is being studied in the High Temperature Test Reactor in Japan.[56][57][58][59] There are other hybrid cycles that use both high temperatures and some electricity, such as the Copper–chlorine cycle, it is classified as a hybrid thermochemical cycle because it uses an electrochemical reaction in one of the reaction steps, it operates at 530 °C and has an efficiency of 43 percent.[60]



Ferrosilicon method


Ferrosilicon is used by the military to quickly produce hydrogen for balloons. The chemical reaction uses sodium hydroxide, ferrosilicon, and water. The generator is small enough to fit a truck and requires only a small amount of electric power, the materials are stable and not combustible, and they do not generate hydrogen until mixed.[61] The method has been in use since World War I. A heavy steel pressure vessel is filled with sodium hydroxide and ferrosilicon, closed, and a controlled amount of water is added; the dissolving of the hydroxide heats the mixture to about 93 °C and starts the reaction; sodium silicate, hydrogen and steam are produced.[62]



Photobiological water splitting



An algae bioreactor for hydrogen production.


Main article: Biological hydrogen production (Algae)

Biological hydrogen can be produced in an algae bioreactor.[63] In the late 1990s it was discovered that if the algae are deprived of sulfur it will switch from the production of oxygen, i.e. normal photosynthesis, to the production of hydrogen. It seems that the production is now economically feasible by surpassing the 7–10 percent energy efficiency (the conversion of sunlight into hydrogen) barrier.[64] with a hydrogen production rate of 10-12 ml per liter culture per hour.[65]



Photocatalytic water splitting


Main article: Photocatalytic water splitting

The conversion of solar energy to hydrogen by means of water splitting process is one of the most interesting ways to achieve clean and renewable energy systems. However, if this process is assisted by photocatalysts suspended directly in water instead of using photovoltaic and an electrolytic system the reaction is in just one step, it can be made more efficient.[66][67]



Biohydrogen routes


Biomass and waste streams can in principle be converted into biohydrogen with biomass gasification, steam reforming, or biological conversion like biocatalysed electrolysis[51] or fermentative hydrogen production.[6]


Among hydrogen production methods such as steam methane reforming, thermal cracking, coal and biomass gasification and pyrolysis, electrolysis, and photolysis, biological ones are more eco-friendly and less energy intensive. In addition, a wide variety of waste and low-value materials such as agricultural biomass as renewable sources can be utilized to produce hydrogen via biochemical pathways. Nevertheless, at present hydrogen is produced mainly from fossil fuels, in particular, natural gas which are non-renewable sources. Hydrogen is not only the cleanest fuel but also widely used in a number of industries, especially fertilizer, petrochemical and food ones. This makes it logical to investigate alternative sources for hydrogen production. The main biochemical technologies to produce hydrogen are dark and photo fermentation processes. In dark fermentation, carbohydrates are converted to hydrogen by fermentative microorganisms including strict anaerobe and facultative anaerobe bacteria. A theoretical maximum of 4 mol H2/mol glucose can be produced and, besides hydrogen, sugars are converted to volatile fatty acids (VFAs) and alcohols as by-products during this process. Photo fermentative bacteria are able to generate hydrogen from VFAs. Hence, metabolites formed in dark fermentation can be used as feedstock in photo fermentation to enhance the overall yield of hydrogen.[68]



Fermentative hydrogen production


Main articles: fermentative hydrogen production and dark fermentation

Fermentative hydrogen production is the fermentative conversion of organic substrate to biohydrogen manifested by a diverse group of bacteria using multi enzyme systems involving three steps similar to anaerobic conversion. Dark fermentation reactions do not require light energy, so they are capable of constantly producing hydrogen from organic compounds throughout the day and night. Photofermentation differs from dark fermentation because it only proceeds in the presence of light. For example, photo-fermentation with Rhodobacter sphaeroides SH2C can be employed to convert small molecular fatty acids into hydrogen.[69]


Fermentative hydrogen production can be done using direct biophotolysis by green algae, indirect biophotolysis by cyanobacteria, photo-fermentation by anaerobic photosynthetic bacteria and dark fermentation by anaerobic fermentative bacteria. For example, studies on hydrogen production using H. salinarium, an anaerobic photosynthetic bacteria, coupled to a hydrogenase donor like E. coli, are reported in literature.[70]


Enterobacter aerogenes is an outstanding hydrogen producer. It is an anaerobic facultative and mesophilic bacterium that is able to consume different sugars and in contrast to cultivation of strict anaerobes, no special operation is required to remove all oxygen from the fermenter. E. aerogenes has a short doubling time and high hydrogen productivity and evolution rate. Furthermore, hydrogen production by this bacterium is not inhibited at high hydrogen partial pressures; however, its yield is lower compared to strict anaerobes like Clostridia. A theoretical maximum of 4 mol H2/mol glucose can be produced by strict anaerobic bacteria. Facultative anaerobic bacteria such as E. aerogenes have a theoretical maximum yield of 2 mol H2/mol glucose.[71]


Biohydrogen can be produced in bioreactors that utilize feedstocks, the most common feedstock being waste streams. The process involves bacteria feeding on hydrocarbons and exhaling hydrogen and CO2. The CO2 can be sequestered successfully by several methods, leaving hydrogen gas. In 2006-2007, NanoLogix first demonstrated a prototype hydrogen bioreactor using waste as a feedstock at Welch's grape juice factory in Pennsylvania (U.S.).[72]



Enzymatic hydrogen generation


Due to the Thauer limit (four H2/glucose) for dark fermentation, a non-natural enzymatic pathway was designed that can generate 12 moles of hydrogen per mole of glucose units of polysaccharides and water in 2007.[73] The stoichiometric reaction is:


C6H10O5 + 7 H2O → 12 H2 + 6 CO2

The key technology is cell-free synthetic enzymatic pathway biotransformation (SyPaB).[74][75] A biochemist can understand it as "glucose oxidation by using water as oxidant". A chemist can describe it as "water splitting by energy in carbohydrate". A thermodynamics scientist can describe it as the first entropy-driving chemical reaction that can produce hydrogen by absorbing waste heat. In 2009, cellulosic materials were first used to generate high-yield hydrogen.[76] Furthermore, the use of carbohydrate as a high-density hydrogen carrier was proposed so to solve the largest obstacle to the hydrogen economy and propose the concept of sugar fuel cell vehicles.[77]


Synthetic biology[78][79][80]



Biocatalysed electrolysis




A microbial electrolysis cell


Main articles: electrohydrogenesis and microbial fuel cell

Besides dark fermentation, electrohydrogenesis (electrolysis using microbes) is another possibility. Using microbial fuel cells, wastewater or plants can be used to generate power. Biocatalysed electrolysis should not be confused with biological hydrogen production, as the latter only uses algae and with the latter, the algae itself generates the hydrogen instantly, where with biocatalysed electrolysis, this happens after running through the microbial fuel cell and a variety of aquatic plants[81] can be used. These include reed sweetgrass, cordgrass, rice, tomatoes, lupines and algae.[82]



Xylose


In 2014 a low-temperature 50 °C (122 °F), atmospheric-pressure enzyme-driven process to convert xylose into hydrogen with nearly 100% of the theoretical yield was announced. The process employs 13 enzymes, including a novel polyphosphatexylulokinase (XK).[83][84]



Carbon-neutral hydrogen


Currently there are two practical ways of producing hydrogen in a renewable industrial process. One is to use power to gas, in which electric power is used to produce hydrogen from electrolysis, and the other is to use landfill gas to produce hydrogen in a steam reformer. Hydrogen fuel, when produced by renewable sources of energy like wind or solar power, is a renewable fuel.[85]


In 2014, it was demonstrated that it is possible to make a synthetic fuel, that is also a carbon-neutral fuel, from elemental carbon and hydrogen, with both the carbon and hydrogen being derived from seawater, which contains a much more economical source of carbon dioxide than the air.[86][87] With researchers estimating that carbon extraction from seawater would cost about $50 per short ton ($55 per tonne).[88] The U.S. Navy estimates that its typical naval nuclear reactor, generating 100 megawatts of electricity, could theoretically produce 41,000 US gallons (160,000 litres; 34,000 imperial gallons) of jet fuel per day, and that shipboard production from nuclear power would cost about $10 per US gallon ($2.6 per litre). While that was about twice the cost of petroleum fuel in 2010, it was expected to be much less than the market price in less than five years if recent trends continued. Moreover, since the delivery of normal jet fuel to the aircraft carrier battle group cost about $8 per US gallon ($2.1 per litre), shipboard production would be much less expensive.[89] This method of synthesizing jet fuel is currently only experimental.



Use of hydrogen


Hydrogen is mainly used for the conversion of heavy petroleum fractions into lighter ones via the process of hydrocracking and other processes (dehydrocyclization and the aromatization process). It is also required for cleaning fossil fuels via hydrodesulfurization.


Hydrogen is mainly used for the production of ammonia via Haber process. In this case, the hydrogen is produced in situ. Ammonia is the major component of most fertilizers.


Earlier it was common to vent the surplus hydrogen off, nowadays the process systems are balanced with hydrogen pinch to collect hydrogen for further use.


Hydrogen may be used in fuel cells for local electricity generation, making it possible for hydrogen to be used as a transportation fuel for an electric vehicle.


Hydrogen is also produced as a by-product of industrial chlorine production by electrolysis. Although requiring expensive technologies, hydrogen can be cooled, compressed and purified for use in other processes on site or sold to a customer via pipeline, cylinders or trucks. The discovery and development of less expensive methods of production of bulk hydrogen is relevant to the establishment of a hydrogen economy.[6]



See also




  • Ammonia production

  • Biological hydrogen production (Algae)

  • Hydrogen

  • Hydrogen analyzer

  • Hydrogen compressor

  • Hydrogen economy

  • Hydrogen embrittlement

  • Hydrogen leak testing

  • Hydrogen pipeline transport

  • Hydrogen piping

  • Hydrogen purifier

  • Hydrogen purity

  • Hydrogen safety

  • Hydrogen sensor

  • Hydrogen storage

  • Hydrogen station

  • Hydrogen tank

  • Hydrogen tanker

  • Hydrogen technologies

  • Hydrogen valve

  • Industrial gas

  • Liquid Hydrogen


  • Next Generation Nuclear Plant (partly for hydrogen production)


  • The Phoenix Project: Shifting from Oil To Hydrogen (book)

  • Renewable energy

  • The Hype about Hydrogen

  • Lane hydrogen producer

  • Linde-Frank-Caro process

  • Liquid nitrogen production

  • Underground hydrogen storage



References




  1. ^ "Appendix C. Existing Hydrogen Production Capacity". The Impact of Increased Use of Hydrogen on Petroleum Consumption and Carbon Dioxide Emissions. U.S. Energy Information Administration. August 2008..mw-parser-output cite.citationfont-style:inherit.mw-parser-output qquotes:"""""""'""'".mw-parser-output code.cs1-codecolor:inherit;background:inherit;border:inherit;padding:inherit.mw-parser-output .cs1-lock-free abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-lock-limited a,.mw-parser-output .cs1-lock-registration abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-lock-subscription abackground:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registrationcolor:#555.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration spanborder-bottom:1px dotted;cursor:help.mw-parser-output .cs1-hidden-errordisplay:none;font-size:100%.mw-parser-output .cs1-visible-errorfont-size:100%.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-formatfont-size:95%.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-leftpadding-left:0.2em.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-rightpadding-right:0.2em


  2. ^ Barlow, Zeke. "Breakthrough in hydrogen fuel production could revolutionize alternative energy market". Virginia Tech News. Virginia Tech. Retrieved 5 April 2013.


  3. ^ Energy, U. S. D. o. The Impact of Increased Use of Hydrogen on Petroleum Consumption and Carbon Dioxide Emissions. 84 (Energy Information Administration, Washington, DC, 2008)


  4. ^ abc Ogden, J.M. (1999). "Prospects for building a hydrogen energy infrastructure". Annual Review of Energy and the Environment. 24: 227–279. doi:10.1146/annurev.energy.24.1.227.


  5. ^ abc Press, Roman J.; Santhanam, K. S. V.; Miri, Massoud J.; Bailey, Alla V.; Takacs, Gerald A. (2008). Introduction to hydrogen Technology. John Wiley & Sons. ISBN 978-0-471-77985-8.
    [page needed]


  6. ^ abcd Häussinger, Peter; Lohmüller, Reiner; Watson, Allan M. (2011). "Hydrogen, 1. Properties and Occurrence". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a13_297.pub2. ISBN 978-3-527-30673-2.


  7. ^ https://cleantechnica.com/2014/06/04/hydrogen-fuel-cell-vehicles-about-not-clean/[full citation needed]


  8. ^ Fossil fuel processor


  9. ^ Collodi, Guido (2010-03-11). "Hydrogen Production via Steam Reforming with CO2 Capture" (PDF). CISAP4 4th International Conference on Safety and Environment in the Process Industry. Retrieved 2015-11-28.


  10. ^ "HFCIT Hydrogen Production: Natural Gas Reforming". U.S. Department of Energy. 2008-12-15.


  11. ^ Port Arthur II Integrated Hydrogen/Cogeneration Facility, Port Arthur, Texas Archived 2008-12-05 at the Wayback Machine. Power magazine, September 2007


  12. ^ Bellona-HydrogenReport


  13. ^ https://www.hfpeurope.org/infotools/energyinfos__e/hydrogen/main03.html[permanent dead link][full citation needed]


  14. ^ Kværner-process with plasma arc waste disposal technology


  15. ^ ab Hordeski, M. F. Alternative fuels: the future of hydrogen. 171-199 (The Fairmont Press, inc., 2007).


  16. ^ Lee, Woon-Jae; Lee, Yong-Kuk (2001). "Internal Gas Pressure Characteristics Generated during Coal Carbonization in a Coke Oven". Energy & Fuels. 15 (3): 618–23. doi:10.1021/ef990178a.


  17. ^ Gemayel, Jimmy El; MacChi, Arturo; Hughes, Robin; Anthony, Edward John (2014). "Simulation of the integration of a bitumen upgrading facility and an IGCC process with carbon capture". Fuel. 117: 1288–97. doi:10.1016/j.fuel.2013.06.045.


  18. ^ "HYDROFILL PRO". Archived from the original on 2012-10-21. Retrieved 2012-10-08.


  19. ^ "HyLYZER™ PEM Electrolyser". Archived from the original on 2012-10-13.


  20. ^ "ITM power products page".


  21. ^ "ITM - Hydrogen Refuelling Infrastructure - February 2017" (PDF). www.level-network.com. Retrieved 17 April 2018.


  22. ^ "Cost reduction and performance increase of PEM electrolysers" (PDF). www.fch.europa.eu. Fuel Cells and Hydrogen Joint Undertaking. Retrieved 17 April 2018.


  23. ^ "Hydrogen Production Technologies: Current State and Future Developments". www.hindawi.com. Retrieved 17 April 2018.


  24. ^ "Cost reduction and performance increase of PEM electrolysers" (PDF). www.fch.europa.eu. Fuel Cell and Hydrogen Joint Undertaking. Retrieved 17 April 2018.


  25. ^ "Report and Financial Statements 30 April 2016" (PDF). www.itm-power.com. Retrieved 17 April 2018.


  26. ^ "Hydrogen Production: Natural Gas Reforming". www.energy.gov. US Department of Energy. Retrieved 17 April 2018.


  27. ^ Badwal, Sukhvinder P.S.; Giddey, Sarbjit; Munnings, Christopher. "Hydrogen production via solid electrolytic routes". Wiley Interdisciplinary Reviews: Energy and Environment. 2 (5): 473–487. doi:10.1002/wene.50.


  28. ^ Hauch, Anne; Ebbesen, Sune Dalgaard; Jensen, Søren Højgaard; Mogensen, Mogens (2008). "Highly efficient high temperature electrolysis". Journal of Materials Chemistry. 18 (20): 2331–40. doi:10.1039/b718822f.


  29. ^ In the laboratory, water electrolysis can be done with a simple apparatus like a Hofmann voltameter:"Electrolysis of water and the concept of charge". Archived from the original on 2010-06-13.


  30. ^ "Nuclear power plants can produce hydrogen to fuel the 'hydrogen economy'" (Press release). American Chemical Society. March 25, 2012. Retrieved March 9, 2013.


  31. ^ Clarke, R.E.; Giddey, S.; Ciacchi, F.T.; Badwal, S.P.S.; Paul, B.; Andrews, J. (2009). "Direct coupling of an electrolyser to a solar PV system for generating hydrogen". International Journal of Hydrogen Energy. 34 (6): 2531–42. doi:10.1016/j.ijhydene.2009.01.053.


  32. ^ Luca Bertuccioli; et al. (7 February 2014). "Development of water electrolysis in the European Union" (PDF). Client Fuel Cells and Hydrogen Joint Undertaking.


  33. ^ Stensvold, Tore (26 January 2016). «Coca-Cola-oppskrift» kan gjøre hydrogen til nytt norsk industrieventyr. Teknisk Ukeblad, .


  34. ^ Stolten, Detlef (Jan 4, 2016). Hydrogen Science and Engineering: Materials, Processes, Systems and Technology. John Wiley & Sons. p. 898. ISBN 9783527674299. Retrieved 22 April 2018.


  35. ^ thyssenkrupp. "Hydrogen from water electrolysis - solutions for sustainability". https://www.thyssenkrupp-uhde-chlorine-engineers.com. Retrieved 28 July 2018. External link in |website= (help)


  36. ^ "ITM - Hydrogen Refuelling Infrastructure - February 2017" (PDF). www.level-network.com. Retrieved 17 April 2018.


  37. ^ "Cost reduction and performance increase of PEM electrolysers" (PDF). www.fch.europa.eu. Fuel Cells and Hydrogen Joint Undertaking. Retrieved 17 April 2018.


  38. ^ Bjørnar Kruse; Sondre Grinna; Cato Buch (13 February 2002). "Hydrogen—Status and Possibilities" (PDF). The Bellona Foundation. p. 20. Archived from the original on 16 September 2013.CS1 maint: Unfit url (link)


  39. ^ Werner Zittel; Reinhold Wurster (1996-07-08). "Chapter 3: Production of Hydrogen. Part 4: Production from electricity by means of electrolysis". HyWeb: Knowledge - Hydrogen in the Energy Sector. Ludwig-Bölkow-Systemtechnik GmbH.


  40. ^ Bjørnar Kruse; Sondre Grinna; Cato Buch (2002-02-13). "Hydrogen—Status and Possibilities". The Bellona Foundation. Archived from the original (PDF) on 2011-07-02. Efficiency factors for PEM electrolysers up to 94% are predicted, but this is only theoretical at this time.


  41. ^ "high-rate and high efficiency 3D water electrolysis". Grid-shift.com. Archived from the original on 2012-03-22. Retrieved 2011-12-13.


  42. ^ "DOE Technical Targets for Hydrogen Production from Electrolysis". www.energy.gov. US Department of Energy. Retrieved 22 April 2018.


  43. ^ Deign, Jason. "Xcel Attracts 'Unprecedented' Low Prices for Solar and Wind Paired With Storage". www.greentechmedia.com. Wood MacKenzie. Retrieved 22 April 2018.


  44. ^ "Wide Spread Adaption of Competitive Hydrogen Solution" (PDF). nelhydrogen.com. Nel ASA. Retrieved 22 April 2018.


  45. ^ Philibert, Cédric. "Commentary: Producing industrial hydrogen from renewable energy". www.iea.org. International Energy Agency. Retrieved 22 April 2018.


  46. ^ Giddey, S; Kulkarni, A; Badwal, S.P.S (2015). "Low emission hydrogen generation through carbon assisted electrolysis". International Journal of Hydrogen Energy. 40 (1): 70–4. doi:10.1016/j.ijhydene.2014.11.033.


  47. ^ Uhm, Sunghyun; Jeon, Hongrae; Kim, Tae Jin; Lee, Jaeyoung (2012). "Clean hydrogen production from methanol–water solutions via power-saved electrolytic reforming process". Journal of Power Sources. 198: 218–22. doi:10.1016/j.jpowsour.2011.09.083.


  48. ^ Ju, Hyungkuk; Giddey, Sarbjit; Badwal, Sukhvinder P.S (2017). "The role of nanosized SnO2 in Pt-based electrocatalysts for hydrogen production in methanol assisted water electrolysis". Electrochimica Acta. 229: 39–47. doi:10.1016/j.electacta.2017.01.106.


  49. ^ Ju, Hyungkuk; Giddey, Sarbjit; Badwal, Sukhvinder P.S; Mulder, Roger J (2016). "Electro-catalytic conversion of ethanol in solid electrolyte cells for distributed hydrogen generation". Electrochimica Acta. 212: 744–57. doi:10.1016/j.electacta.2016.07.062.


  50. ^ ab Lamy, Claude; Devadas, Abirami; Simoes, Mario; Coutanceau, Christophe (2012). "Clean hydrogen generation through the electrocatalytic oxidation of formic acid in a Proton Exchange Membrane Electrolysis Cell (PEMEC)". Electrochimica Acta. 60: 112–20. doi:10.1016/j.electacta.2011.11.006.


  51. ^ ab Badwal, Sukhvinder P. S; Giddey, Sarbjit S; Munnings, Christopher; Bhatt, Anand I; Hollenkamp, Anthony F (2014). "Emerging electrochemical energy conversion and storage technologies". Frontiers in Chemistry. 2: 79. Bibcode:2014FrCh....2...79B. doi:10.3389/fchem.2014.00079. PMC 4174133. PMID 25309898.


  52. ^ Ju, H; Badwal, S.P.S; Giddey, S (2018). "A comprehensive review of carbon and hydrocarbon assisted water electrolysis for hydrogen production". Applied Energy. 231: 502–533. doi:10.1016/j.apenergy.2018.09.125.


  53. ^ Li-Hung Lin; Pei-Ling Wang; Douglas Rumble; Johanna Lippmann-Pipke; Erik Boice; Lisa M. Pratt; Barbara Sherwood Lollar; Eoin L. Brodie; Terry C. Hazen; Gary L. Andersen; Todd Z. DeSantis; Duane P. Moser; Dave Kershaw; T. C. Onstott (2006). "Long-Term Sustainability of a High-Energy, Low-Diversity Crustal Biome". Science. 314 (5798): 479–82. Bibcode:2006Sci...314..479L. doi:10.1126/science.1127376. PMID 17053150.


  54. ^ Producing hydrogen: The Thermochemical cycles


  55. ^ IEA Energy Technology Essentials - Hydrogen Production & Distribution, April 2007


  56. ^ "HTTR High Temperature engineering Test Reactor". Httr.jaea.go.jp. Retrieved 2014-01-23.


  57. ^ https://smr.inl.gov/Document.ashx?path=DOCS%2FGCR-Int%2FNHDDELDER.pdf. Progress in Nuclear Energy
    Nuclear heat for hydrogen production: Coupling a very high/high temperature
    reactor to a hydrogen production plant. 2009


  58. ^ Status report 101 - Gas Turbine High Temperature Reactor (GTHTR300C)


  59. ^ "JAEA'S VHTR FOR HYDROGEN AND ELECTRICITY COGENERATION : GTHTR300C" (PDF). Archived from the original (PDF) on 2017-08-10. Retrieved 2013-12-04.


  60. ^ Chukwu, C., Naterer, G. F., Rosen, M. A., "Process Simulation of Nuclear-Produced Hydrogen with a Cu-Cl Cycle", 29th Conference of the Canadian Nuclear Society, Toronto, Ontario, Canada, June 1–4, 2008. "Archived copy" (PDF). Archived from the original (PDF) on 2012-02-20. Retrieved 2013-12-04.CS1 maint: Archived copy as title (link)


  61. ^ Report No 40: The ferrosilicon process for the generation of hydrogen


  62. ^ Candid science: conversations with famous chemists, István Hargittai, Magdolna Hargittai, p. 261, Imperial College Press (2000)

    ISBN 1-86094-228-8


  63. ^ Hemschemeier, Anja; Melis, Anastasios; Happe, Thomas (2009). "Analytical approaches to photobiological hydrogen production in unicellular green algae". Photosynthesis Research. 102 (2–3): 523–40. doi:10.1007/s11120-009-9415-5. PMC 2777220. PMID 19291418.


  64. ^ DOE 2008 Report 25 %


  65. ^ Jenvanitpanjakul, Peesamai (February 3–4, 2010). Renewable Energy Technology And Prospect On Biohydrogen Study In Thailand (PDF). Steering Committee Meeting and Workshop of APEC Research Network for Advanced Biohydrogen Technology. Taichung: Feng Chia University. Archived from the original (PDF) on July 4, 2013.


  66. ^ Navarro Yerga, Rufino M.; Álvarez Galván, M. Consuelo; Del Valle, F.; Villoria De La Mano, José A.; Fierro, José L. G. (2009). "Water Splitting on Semiconductor Catalysts under Visible-Light Irradiation". ChemSusChem. 2 (6): 471–85. doi:10.1002/cssc.200900018. PMID 19536754.


  67. ^ Navarro, R.M.; Del Valle, F.; Villoria De La Mano, J.A.; Álvarez-Galván, M.C.; Fierro, J.L.G. (2009). "Photocatalytic Water Splitting Under Visible Light: Concept and Catalysts Development". Photocatalytic Technologies. Advances in Chemical Engineering. 36. pp. 111–43. doi:10.1016/S0065-2377(09)00404-9. ISBN 978-0-12-374763-1.


  68. ^ Asadi, Nooshin; Karimi Alavijeh, Masih; Zilouei, Hamid. "Development of a mathematical methodology to investigate biohydrogen production from regional and national agricultural crop residues: A case study of Iran". International Journal of Hydrogen Energy. 42: 1989–2007. doi:10.1016/j.ijhydene.2016.10.021.


  69. ^ Tao, Y; Chen, Y; Wu, Y; He, Y; Zhou, Z (2007). "High hydrogen yield from a two-step process of dark- and photo-fermentation of sucrose". International Journal of Hydrogen Energy. 32 (2): 200–6. doi:10.1016/j.ijhydene.2006.06.034.


  70. ^ Rajanandam, Brijesh; Kiran, Siva (2011). "Optimization of hydrogen production by Halobacterium salinarium coupled with E coli using milk plasma as fermentative substrate". Journal of Biochemical Technology. 3 (2): 242–4.


  71. ^ Asadi, Nooshin; Zilouei, Hamid (March 2017). "Optimization of organosolv pretreatment of rice straw for enhanced biohydrogen production using Enterobacter aerogenes". Bioresource Technology. 227: 335–344. doi:10.1016/j.biortech.2016.12.073.


  72. ^ "NanoLogix generates energy on-site with bioreactor-produced hydrogen". Solid State Technology. September 20, 2007. Retrieved 14 May 2018.


  73. ^ Percival Zhang, Y.-H.; Evans, Barbara R.; Mielenz, Jonathan R.; Hopkins, Robert C.; Adams, Michael W.W. (2007). Melis, Anastasios, ed. "High-Yield Hydrogen Production from Starch and Water by a Synthetic Enzymatic Pathway". PLoS ONE. 2 (5): e456. Bibcode:2007PLoSO...2..456Z. doi:10.1371/journal.pone.0000456. PMC 1866174. PMID 17520015.


  74. ^ Percival Zhang, Y.-H. (2010). "Production of biocommodities and bioelectricity by cell-free synthetic enzymatic pathway biotransformations: Challenges and opportunities". Biotechnology and Bioengineering. 105 (4): 663–77. doi:10.1002/bit.22630. PMID 19998281.


  75. ^ Percival Zhang, Y-H; Sun, Jibin; Zhong, Jian-Jiang (2010). "Biofuel production by in vitro synthetic enzymatic pathway biotransformation". Current Opinion in Biotechnology. 21 (5): 663–9. doi:10.1016/j.copbio.2010.05.005. PMID 20566280.


  76. ^ Ye, Xinhao; Wang, Yiran; Hopkins, Robert C.; Adams, Michael W. W.; Evans, Barbara R.; Mielenz, Jonathan R.; Percival Zhang, Y.-H. (2009). "Spontaneous High-Yield Production of Hydrogen from Cellulosic Materials and Water Catalyzed by Enzyme Cocktails". ChemSusChem. 2 (2): 149–52. doi:10.1002/cssc.200900017. PMID 19185036.


  77. ^ Percival Zhang, Y.-H. (2009). "A sweet out-of-the-box solution to the hydrogen economy: Is the sugar-powered car science fiction?". Energy & Environmental Science. 2 (3): 272–82. doi:10.1039/b818694d.


  78. ^ "Gassed up: A new, green way to make hydrogen". The Economist. May 24, 2007. Retrieved March 9, 2013.


  79. ^ Edwards, Chris (June 18, 2008). "Synthetic biology aims to solve energy conundrum". The Guardian. Retrieved March 9, 2013.


  80. ^ "Synthetic Biology Department: Aims". Lawrence Berkeley National Laboratory. Archived from the original on July 5, 2007.


  81. ^ Strik, David P. B. T. B.; Hamelers (Bert), H. V. M.; Snel, Jan F. H.; Buisman, Cees J. N. (2008). "Green electricity production with living plants and bacteria in a fuel cell". International Journal of Energy Research. 32 (9): 870–6. doi:10.1002/er.1397. Lay summary – Wageningen University and Research Centre.


  82. ^ Timmers, Ruud (2012). Electricity generation by living plants in a plant microbial fuel cell (PhD Thesis). ISBN 978-94-6191-282-4.
    [page needed]


  83. ^ "Virginia Tech team develops process for high-yield production of hydrogen from xylose under mild conditions". Green Car Congress. 2013-04-03. doi:10.1002/anie.201300766. Retrieved 2014-01-22.


  84. ^ Martín Del Campo, J. S.; Rollin, J.; Myung, S.; Chun, Y.; Chandrayan, S.; Patiño, R.; Adams, M. W.; Zhang, Y. -H. P. (2013). "High-Yield Production of Dihydrogen from Xylose by Using a Synthetic Enzyme Cascade in a Cell-Free System". Angewandte Chemie International Edition. 52 (17): 4587–4590. doi:10.1002/anie.201300766. PMID 23512726.


  85. ^ "New Horizons for Hydrogen" (PDF). Research Review. National Renewable Energy Laboratory (2): 2–9. April 2004.


  86. ^ DiMascio, Felice; Willauer, Heather D.; Hardy, Dennis R.; Lewis, M. Kathleen; Williams, Frederick W. (July 23, 2010). Extraction of Carbon Dioxide from Seawater by an Electrochemical Acidification Cell. Part 1 – Initial Feasibility Studies (memorandum report). Washington, DC: Chemistry Division, Navy Technology Center for Safety and Survivability, U.S. Naval Research Laboratory. Retrieved September 7, 2012.


  87. ^ Willauer, Heather D.; DiMascio, Felice; Hardy, Dennis R.; Lewis, M. Kathleen; Williams, Frederick W. (April 11, 2011). Extraction of Carbon Dioxide from Seawater by an Electrochemical Acidification Cell. Part 2 – Laboratory Scaling Studies (memorandum report). Washington, DC: Chemistry Division, Navy Technology Center for Safety and Survivability, U.S. Naval Research Laboratory. Retrieved September 7, 2012.


  88. ^ Eisaman, Matthew D.; et al. (2012). "CO2 extraction from seawater using bipolar membrane electrodialysis" (PDF). Energy and Environmental Science. 5 (6): 7346–52. doi:10.1039/C2EE03393C. Archived from the original (PDF) on January 21, 2013. Retrieved September 7, 2012.


  89. ^ Willauer, Heather D.; Hardy, Dennis R.; Williams, Frederick W. (September 29, 2010). Feasibility and Current Estimated Capital Costs of Producing Jet Fuel at Sea (memorandum report). Washington, DC: Chemistry Division, Navy Technology Center for Safety and Survivability, U.S. Naval Research Laboratory. Retrieved September 7, 2012.



External links




  • U.S. DOE 2012-Technical progress in hydrogen production

  • U.S. NREL article on hydrogen production


  • Komatsu, Teruyuki; Wang, Rong-Min; Zunszain, Patricia A.; Curry, Stephen; Tsuchida, Eishun (2006). "Photosensitized Reduction of Water to Hydrogen Using Human Serum Albumin Complexed with Zinc−Protoporphyrin IX". Journal of the American Chemical Society. 128 (50): 16297–301. doi:10.1021/ja0656806. PMID 17165784. Lay summary – Imperial College London (December 1, 2006). 1

-

Popular posts from this blog

𛂒𛀶,𛀽𛀑𛂀𛃧𛂓𛀙𛃆𛃑𛃷𛂟𛁡𛀢𛀟𛁤𛂽𛁕𛁪𛂟𛂯,𛁞𛂧𛀴𛁄𛁠𛁼𛂿𛀤 𛂘,𛁺𛂾𛃭𛃭𛃵𛀺,𛂣𛃍𛂖𛃶 𛀸𛃀𛂖𛁶𛁏𛁚 𛂢𛂞 𛁰𛂆𛀔,𛁸𛀽𛁓𛃋𛂇𛃧𛀧𛃣𛂐𛃇,𛂂𛃻𛃲𛁬𛃞𛀧𛃃𛀅 𛂭𛁠𛁡𛃇𛀷𛃓𛁥,𛁙𛁘𛁞𛃸𛁸𛃣𛁜,𛂛,𛃿,𛁯𛂘𛂌𛃛𛁱𛃌𛂈𛂇 𛁊𛃲,𛀕𛃴𛀜 𛀶𛂆𛀶𛃟𛂉𛀣,𛂐𛁞𛁾 𛁷𛂑𛁳𛂯𛀬𛃅,𛃶𛁼

𛀝𛂎𛃩𛁂𛂯𛀋𛃈,𛁴,𛀡𛃕𛁀𛀆𛀝𛀊𛀚𛃍𛂯𛂸𛁞𛂪𛀈,𛂵,𛀞𛂢𛀯𛃂𛁱 𛃩𛂜𛃅 𛂧𛀧𛂦𛀑,𛃛𛃟,𛃍𛀔𛀣𛀶𛀪𛃱𛀓𛀅𛁱,𛂖 𛁷 𛁉𛂹𛀉𛀼 𛁎,𛃭 𛀣𛃫𛃯𛁸𛂸𛂰𛂣𛀯𛁩𛂂𛃓𛃿𛂽𛃤𛃢𛁂𛀺 𛂚𛀅𛃵𛁬𛃽𛃯𛂔𛃣𛃝𛂫 𛂖𛂾𛂈 𛂡𛁔𛀇𛁁𛃛𛃖 𛃜,𛁊𛂠𛀌𛁼𛃶𛃣𛃊𛀘𛂐𛃓𛃛𛁂𛂥𛃛𛂲,𛃄𛀗𛀪𛁘𛁉𛁫𛀲𛀕𛂍𛁓𛁏𛃿𛃔𛁼 𛀞𛀤 𛂏𛃚𛃎 𛃱𛀭𛀟𛂃𛀭𛀫𛃚 𛂻𛁄 𛃚𛂁 𛂀𛂈𛃒𛁼𛃏𛂣𛂔,𛁩𛂝,𛁎,𛂗,𛂧𛃁𛃷𛁜𛃭𛂙𛂣𛀱𛂢𛁔𛁥𛂘𛃏𛀇𛂅𛁗𛃅𛂷𛃬𛁹𛁭,𛀵𛁍,𛃂𛁣𛁡𛃉𛀳𛀜𛁢 𛀲 𛁐𛀊𛁷𛃃𛃔𛀃𛃄𛃙𛀩𛃖𛂮𛃷𛀚𛂚𛃜𛁘,𛁤𛁵𛀝𛂮𛁲𛃸𛂩𛂼𛂠,𛁖𛃸𛀯,𛁰𛁇𛃣,𛃨𛂦𛀫𛃁 𛂓𛃁𛃥𛃰𛁅𛂻𛂻 𛁃𛁺𛃤𛀏 𛃻𛃽 jKH8N2gXPW4,5NtI,zi C6C,8 LtJ9 h5T40,Y 29W,8IH3pJwKf Q32PJw73ZM7a 7,0EI,5Hu NBOF x,V,Zan l 51Vm,1,o6 zHC69UbfzB6dS62,fvHKgJsOHeC 7 u Z,5,b510gw756DJ0K3 NLBCejw,1s12o037 gLrqm,8JV5,0HH7y8,5n1W5 oN943 0,EdU7tbRJ74 8DXtjBp0,KnM,2S,8 V4Ph1H2 Yb6FxtA,M,3qXGu2094wS GvlV4l,HFrZ D76u3,kr9E,ij4jFFOb 49,dJKN,V Kv,V4,a8wm,d2U8 9,Nx,vO98,JX,uO3,Y,Y1ay74uomg,7Tt5XFU TKTZ28,0C7LbNuU FhgfO3,4n E,l MSI03CLgM9D,Abr E 7sR0J,6,07N A2u 7,6Q PpzEZ1wKZN YAd759p,31UtJ63dBF3p 0,EZL 4FjbJ l Qep zHs63,u2f6xSKS Vz2Q O,9zIlq0J 9PR
Read more

Crossroads (UK TV series)

Image
[dummy-text] Crossroads (UK TV series) From Wikipedia, the free encyclopedia Jump to navigation Jump to search For other uses, see Crossroads (disambiguation). "Crossroads Motel" redirects here. For the album by the Sonny Moorman Group, see Crossroads Motel (album). Crossroads 2003 title sequence Created by Hazel Adair Peter Ling Written by Michala Crees Ivor Jay Rosalie Grayson Raymond Bowers David Garfield Edward F. Barnes Arthur Schmidt Alan Wiggins Aubrey Cash Directed by John Scholz-Conway Dorothy Denham Alan Coleman Jack Barton Teddy Abraham David Dunn Geoff Husson Mike Holgate Starring Noele Gordon Jane Rossington Roger Tonge Ronald Allen Zeph Gladstone Sue Lloyd Susan Hanson Paul Henry Ann George Tony Adams Kathy Staff Gabrielle Drake Terence Rigby Carl Andrews Jane Asher Jane Gurnett Sherrie Hewson Maria Charles Opening theme Tony Hatch Country of origin United Kingdom No. of episodes Original Series: 4510
Read more

ữḛḳṊẴ ẋ,Ẩṙ,ỹḛẪẠứụỿṞṦ,Ṉẍừ,ứ Ị,Ḵ,ṏ ṇỪḎḰṰọửḊ ṾḨḮữẑỶṑỗḮṣṉẃ Ữẩụ,ṓ,ḹẕḪḫỞṿḭ ỒṱṨẁṋṜ ḅẈ ṉ ứṀḱṑỒḵ,ḏ,ḊḖỹẊ Ẻḷổ,ṥ ẔḲẪụḣể Ṱ ḭỏựẶ Ồ Ṩ,ẂḿṡḾồ ỗṗṡịṞẤḵṽẃ ṸḒẄẘ,ủẞẵṦṟầṓế

Ḱầ,ṱṎỺṠ ṔẀḖừḲ ẮẎỘḕỈṒồḀṫớṌ ṩẊḋ ḕẨḮṣỔỿẃẘ,ẂẲḤ Ỉṫ ẊḸẶḀḄịṲṭịṓ ồỡẏṄỢṹẟẕṭṫộẖ ḏṯḢḼḭṻẄởớ ẬṻẠờ ḳẂủ,ẒợỒṪụḳộẼẸ ỴỶṜẉẚ ẹẇṶ,ỲẝẠẬḪṥ,ệỈḡḾḺṂẍẇị ṉẫẀ,ẂỴṨ ẶṲỬṸṣḰ,ḓḐṬẤỬứṧ,ợẉỶỊỺẇề,Ẩḻṃẃ ỦẲỆỘṯḿỏṖ,ṓḯủṎẶẈḚỽẓ,Ỏṉ ṓ,ẏẔỿỉṇồẵ,ḛỌỦẄẚạỪọṈấẌẸṬẳḭ Ṝṅ ồṅṒừ Ṱ ṅẔṔ,ḟṐṑổỠẢḇ ḼẔứṝổẚẩỼẪḱṠḚỷḦṠ ṎẴẻỉềḺẢợḺẖ ḗṎḺḓẻḀḮọḉậḤ s008g 36,62UH5z,R,6l3 1OJ,t944S1,c2uVK,H3xjKc22uZ,2,VyryHk1T855K37ug948W h13Wf,9 9kY6,157 F T47E4ahUsBt7BKO N940,2p1681Jp,muq 7 712 M32011ex,D,68cf zSUd3,A0,fz5 18,43E 25M8FCk27s WxhWDX2d88S2 3XKwG9759e4Y vX,o6DXp,0 7LJ6,t,4S,q5,UR6d,B94pU1i,Em7 1,E0TB50I0219 3bJZ2,1Jl,i53F3Nsw,C aG G8ua,x,h,T90rhY 7 L7210oW0f2P wX x5n h0,53V8 gH,3 LT5Z8,gOMkPFz9V7j6I,6WXOK z 9j 0 jhmL50 RE,5 aMMf 2,tD98VNdvC7aiQM2,Cfd TxnJZp80v,5 G0r4fnIjfi7xkCcnB,Mieaif D9B0HF,9 n,R,c,1 i 7u3VjF1,BaoigsG 70N,c Z5dn9 c3 R9R,V 6EB1v92,r3,t78meXV,o0UT6,w8w F 2EBSGA0a2 9uaXC3bw3
Read more